More

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

Help your young ones learn to ride a bike by installing Sunlite Training Wheels. These wheels roll smoothly thanks to their steel construction with hard rubber tires. • Fits 14-20-inch bicycles

These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle

• Forged aluminum construction • Center mount design

An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets. CONSTRUCTION • Lightweight red anodized aluminum MOUNTING SYSTEM • Mount to quick release skewer ADDED BENEFIT • A quick and easy solution to make fenders fit • Set of four

Built for Si dropouts. A durable kickstand for Cannondale Si dropouts that is stylish and smartly equipped. Where it thrives: Leisurely rides, in town What it's built for: Durability Highlights: - Stylish and sleek - Light and strong alloy construction - Flat/post brake mount compatible

Keep corrosive sweat from reaching your frame while you're generating heat on your trainer. - Cell phone pouch included

Ideal for kids' bikes or adult bikes up to 1.5" tires. Snap-fit; no tools required. Precision molded from durable thermoplastic.

Designed to mount on most bicycles measuring 12 to 20 inches. Fits 28.6mm or smaller chainstays and includes a plastic frame protector (should fit most oversized chainstays) Complete kit includes two wheels and all hardware for installation, as well as a plastic frame protector (may need to be removed for some oversized chainstays)

- Replacement axle bolt extension for Sunlite HD Adjustable training wheels - Extends axle out to clear derailleurs in special needs applications

This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

Kickstand for Carpe and Vector 2019-2022 frames.

• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction

• Water resistant • Durable plastic • Fits most bikes

This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.

This Travoy hitch from Burley connects your Travoy trailer (sold separately) to your bicycle seatpost. Replace a lost hitch or get one for each bike in your quiver for convenience.

This wall mounted storage solution screws into the wall and offers adjustable hooked-arms to hold a bike. - Independently adjustable arms - Padded arms to protect bike - Dimensions: 16.25 x 17 x 14.5"

- Convenient storage for any bike with elegant space-saving design - Welded construction with padded wheel hook - Maximum load: 40lbs - Includes Da Vinci tire tray to save walls from tire marks

• Aluminum double kickstand • Includes top plate • Adjustable for bikes from 24" to 700c

Lightweight, removable fender intended for MTB use - Adjustable rubber straps make installation quick and easy - 100 percent recyclable polypropylene

Expand the compatibility of your Dash FM child bike seat to fit a wider range of bikes. These Extended Rails offer additional clearance between the seat and bike frame, making them a great option for many bikes including those with smaller frames or larger tires. Pick up an extra set to adapt your Dash FM to fit each of your bikes or to replace the original Mounting Rails on the Dash FM Extended Rails if lost or damaged. Features: - Easy installation on the Dash FM child bike seat - Provides additional clearance for bikes with larger tires or smaller sized frames - Quickly snaps into place in the Frame Mounting Block Includes: - Extended Rails NOT Included: - Dash FM Bike Seat - Frame Mounting Block Compatible With: - Dash FM 2020 - Dash FM | Extended Rails 2020 NOT Compatible With: - Dash X FM 2020

Up, Up and Away - Clever auto-locking mechanism prevents accidental release. - Available with or without utility straps to hold not only bicycle, but also larger object such as kayak, ladder etc. - Includes mounting hardware & full instructions. Durable powder-coated steel with nylon tensile cord rope. Features - Space-Saving Design: Reclaim valuable storage space with the El Greco bicycle hoist. Designed for ceilings up to 12ft high, it's great for road, commuter and mountain bikes in both adult and child sizes. - Safe and Secure: Supporting up to 50 lbs, our bicycle storage system helps protect your investment. An auto-lock mechanism prevents accidental release, while rubber-coated hooks support the frame without damaging it. - Quick, Easy Access: Utilizing a convenient pulley system, our ceiling bike rack makes it easy to raise and lower your gear. Featuring durable nylon tensile cord rope, it securely holds heavy weight without stretching. - Style Meets Strength: Thanks to a silver stamped powder-coat finish, our bike hanger boasts an attractive design and is a seamless addition to any garage or decor. Designed and engineered in the US, this bicycle hoist is durable and reliable, for quality you can trust. - No-Hassle Installation: Designed with inline bolt holes, our bike hoist easily mounts to ceiling joists. All necessary hardware is included, and access to our US-based support team allows frustration-free setup. - Max Weight: Safely Secure up to 50 lbs

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 27.5+ and 29-inch wheel compatible

- Folding - Vinyl coated hooks - Hardware included

Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.

Features - E-Bike specific kickstand - Designed to handle the additional weight of battery assisted Giant bicycles - Adjustable leg assures the perfect fit for all frame sizes Fits: - Road-E - Quick-E - Dirt-E - ToughRoad GX-E - Explore-E - Vall-E - Amiti-E