Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

(489 matches)
Shimano In-Line Brake Cable Adjuster
$15.00
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Problem Solvers Handlebar Shim
$10.00 - $13.85
The Problem Solvers Handlebar Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Problem Solvers Cassette Spacer
$6.50 - $7.75
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Sunlite Dog Leash
$29.99
A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.
Sunlite Chromoly Quill Stem Extender
$29.99
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
Shimano Di2 E-Tube Wire
$22.99 - $43.49
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
Specialized Carbon Ski-Tip Extensions
$125.00
Specialized's Carbon Ski-Tip Extensions are lightweight and ergonomic, perfect for optimizing your aero position. The 40-degree carbon ski-tip extensions offer 10mm of lateral jog to fit a wide range of arm widths. The 22.2mm outer diameter is compatible with many standard aftermarket aerobar clamps, and at 400mm long, they can be cut to fit your specific reach.
Third Eye Chainwatcher
$9.99
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
Giant Defy/Avail Seat Clamp With Rack Mount
$12.00
-Seatpost clamp with rack mount for Giant's Defy/Avail models
Giant Defy/Avail Seatpost Clamp
$9.00
-Seatpost clamp for Defy/Avail models
Giant Advanced Road ISP Seat Clamp
$80.00
-Seat clamp for Advanced ISP models (2009-2011)
Profile Design Aerobar Bracket Riser Kit
$24.99 - $26.99
Compatible with Profile Design's T+ carbon, T+ aluminum, and ZBS aerobars. Make sure your fit is totally dialed with the appropriate rise for your aerobars.
Profile Design T4+ Carbon Extensions
$157.49
Profile Design's aero-bar extensions are made of feathery light carbon fiber, come in different bends to suit all riding positions and feature the standard 22.2mm diameter to fit Profile and other brand base bars and extension mounts (base bars and mounts sold separately). The T4+ model has a shallow-angle ski bend suitable for triathlons and time trials. They are also drilled for internally routing your cables.
Profile Design UCM XL Universal Computer Mount 60mm
$11.99
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Profile Design UCM Universal Computer Mount 25mm
$10.00
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Profile Design F-19 Replacement Pads
$21.99
Profile Design's F-19 Replacement Pads are the correct ones for their F-19 armrests. These pads feature Lycra-covered medium-durometer foam and are held on with Velcro backing.
Profile Design F-35 Velcro Back Pad
$24.99
Profile Design's Lux Pads keep both performance and comfort high, exactly where they need to be when you're pushing your boundaries. These velcro backed pads fit Profile Designs F-35 armrests (sold separately), and feature EVA foam, an anti-microbial cover, and a contoured edge for improved long-term comfort. They're even available in three thicknesses so you can dial in your fit to perfection.
Profile Design F-35 Aluminum Armrest Kit
$49.99
Light, comfortable, and stable, Profile Design's F-35 Aluminum Armrest Kit provides excellent adjustability for finding your perfect position. These versatile aluminum armrests have an ergonomic shape, 15 degrees of rotational adjustment and 3 fore/aft positions with a total of 30mm of adjustment. The comfortable Lycra-covered 16mm-thick EVA foam pads simply attach to the armrests with adhesive-backed Velcro so no straps are required. The pads are anti-bacterial, and feature contoured edges for increased long-term comfort.
Profile Design F-22 Replacement Pads
$21.00
Profile Design's F-22 Replacement Pads are the correct ones for their F-19 armrests. These pads feature Lycra-covered medium-durometer foam and are held on with Velcro straps for easy installation.
Profile Design Multi-Fit System Kit
$99.99
Profile Design's Multi-Fit System Kit allows early model Profile Design aero bars to work with 26.0mm and 31.8mm handlebars. This fine 6061-aluminum upgrade gives you the excellent adjustability of Profile's F-19 armrests that feature length, width and rotational settings. You'll also appreciate the supportive, comfortable Lycra-covered foam F-19 pads. Plus, on the Flip-Up model, the brackets flip up and out of the way so that you can hold onto the tops of the base bar and stand and climb with no worries about your knees hitting the armrests.
Profile Design Venturi Pads
$17.99
Profile Design’s Venturi Pads are the correct foam replacement pads for your Profile Design Century Aerobars (sold separately). They have adhesive on the bottom.
Profile Design F-35 Armrest Kit
$49.99
Light, comfortable, and stable, Profile Design's F-35 Armrest Kit provides excellent adjustability for finding your perfect position. These versatile aluminum armrests have an ergonomic shape, 15 degrees of rotational adjustment and 3 fore/aft positions with a total of 30mm of adjustment. You'll also love the comfortable Lycra-covered 16mm-thick EVA foam pads that simply attach to the armrests with adhesive-backed Velcro so no straps are required. The pads also have contoured edges for additional comfort and they're even antibacterial.
FSA Microspacer Headset Spacers
$9.49
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
Greenfield Stabilizer Rear-Mount Kickstand (Powdercoat Black) (305mm)
$24.99
Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear of the bicycle so it's perfect for bikes that won't accept regular kickstands. It's also durable, light and nice looking. Plus, it features non-slip clamping surfaces, is made of a special non-corrosive aluminum, is light, and is built to last and last.
Greenfield Kickstand RetroKit
$3.99
Greenfield's RetroKit is used to mount Greenfield kickstands (sold separately) on bicycles that require this special piece due to cables being in the way or an unusual frame design. If you have any questions about using the RetroKit, please contact us.
Greenfield Kickstand (Burnished Aluminum w/Retro Kit) (285mm)
$19.99
Greenfield's Kickstand w/Retro Kit attaches quickly and easily to bicycles that have cables in the way or an unusual frame design. It provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, light and nice looking. Plus, it's made of a special non-corrosive aluminum and is built to last. If you have any questions about using the RetroKit, please contact us.
Origin8 Star Nut
$4.99 - $5.00
Standard replacement star nuts for threadless steerers.
Origin8 Clamp-On Single Cable Stop
$12.99
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
Origin8 Chain Deflector
$15.00
• Anti chain-suck device • Allows the front derailleur to be adjusted for strong downshifts • If not using front derailleur the device can act as a chain guide
Origin8 Braze-On Front Derailleur Adapter
$15.00
• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g
Page 1 of 17 Next page