Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
Increase the precision of your shifting cables with Origin-8's Adjuster kit. From fine tuning on the stand to adjusting on the fly, these are a great addition to make sure that the shifting of your derailleur is always spot on. • Micro adjustment for shifting precision • To be used right inline with shift cables • Set of 2
• Fits cantilever brakes • Sold individually
• For mountain bike cable-actuated brakes • 1.5mm x 3000mm • Stainless steel
• Galvanized steel inner wire • Standard 5mm brake housing • Front or Rear
• MTB • 1700mm • 1.5mm • PTFE
• MTB or Road • 1.5 x 2667mm • Galvanized
• Complete cable kits for internal three speed hubs
$14.00 - $14.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
$34.99 - $38.49
Jagwire's Mountain Pro Brake Cable Kit is the perfect way to upgrade your braking while adding some style to your bike, too, since it comes in many colors. The kit provides everything needed to replace your Shimano or SRAM mountain bike brake cables including Jagwire's super-smooth Teflon-coated cables and compression-resistant Kevlar-reinforced housing for dramatically improved braking performance. You'll also love that this kit is much lighter than what you had on your bike before. Plus, with all the small parts included in the kit it's easy to install.
$89.99 - $90.00
Road Elite Link brake cable and housing sets are constructed from interlocking aluminum links for completely compressionless operation. Combine that with the included low-friction Teflon cables and you've got the pinnacle of mechanical braking performance. - Durable, aluminum housing won't kink or rust - Compressionless housing results in crisp brake lever feel - 50% lighter than traditional housings - Linked design allows for tight bends without kinking during tricky cable runs - Slick-lube liner - Teflon coated slick stainless cables - SRAM/Shimano road compatible cable end Included in kit: - Front Cable Length: 850mm - Rear Cable Length: 1650mm - Housing Length: 400mm w/610mm Lubed Liner - 400mm w/1430mm Lubed Liner - 240mm w/710mm Lubed Liner - 26 Links - 10 Mini Tube Tops - 3 Cable Donuts - 2 CGX 5mm Brake housing, 300mm - 2 Open End Caps - 2 Cable Tips - 2 Adaptor End Caps - 2 Rotating Hooks
$94.99 - $95.00
Road Elite Link shifter housing sets are constructed from interlocking aluminum links for completely compressionless operation. Combine that with the included low-friction Teflon cables and you've got a lightweight, friction-fighting package that provides optimal performance. - Durable, aluminum housing won't kink or rust - Precise, compressionless shifting performance - 20% lighter than traditional housings - SRAM/Shimano compatible cable ends are one sided for easy installation Included in kit: - Front Cable Length: 2300mm - Rear Cable Length: 2300mm - Housing Length: 400mm w/1430mm Lubed Liner - 400mm w/1430mm Lubed Liner - 300mm w/1120mm Lubed Liner - 30 Links - 10 Mini Tube Tops - 6 Cable Donuts - 2 LEX 4mm Shift Housing, 300mm - 2 Open End Caps - 2 Cable Tips - 2 Pro Indexed Inline Adjusters - 2 Rotating Hooks - 2 Housing Connectors (4/4mm) - 1 Dirt Guard
$2.99 - $3.99
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$11.99 - $16.49
Jagwire's Shift Inner Wire is made of stainless steel and coated with Teflon for excellent corrosion resistance, durability and a super-smooth shift every time. It's a nice upgrade for your shift cables.
Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.
Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$10.99 - $88.99
Jagwire's Tube Tops are installed over your cable housing sections to provide a soft bumper to deaden the impact of cables hitting your frame while riding, minimizing rattles and protecting your frame's fine finish. They feature a split seam so they're easy to install by hand with no cable disassembly required. Just open the Tube Top's seam, put it on the housing where it's rubbing the frame, rotate the seam so it faces out and release. The Tube Top will stay in place and keep your bike quiet and safe.
$10.99 - $12.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. The Aluminum model accepts lines up to 5mm in diameter and the lines snap in. The Stainless model grips fully around the lines and is adjustable to fit most diameters.
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
- Pre-stretched, Teflon coated 19 strand inner wire
- Aluminum straddle cable carrier for cantilever brake
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes
Road Elite Sealed shift cable & housing sets completely protect your system against dirt, mud, and debris. A fully continuous liner with upgraded Speed-Lube lubricant ensures that protection against the elements does not come at the expense of top level performance. - Polymer coated cables dramatically reduce friction - Speed-Lube ultra slick lubricant protects cable to ensure consistent performance - Sealed system prohibit grime from contaminating system and compromising shift quality - SRAM/Shimano compatible cable ends are one sided for easy installation Kit includes: - Front Cable Length: 2300mm - Rear Cable Length: 2300mm - Housing Length: 1700mm - 2 LEX 4mm Shift Housing, 300mm - 2 Housing Connectors (4/5mm) - 2 Grub Seals - 3 Open Brass End Caps - 4 Open Alloy End Caps for 5mm Housing - 2 Open Alloy End Caps for 4mm Housing - 2 Non-Crimp Cable Tips - 2 3G Tube Tops - 2 Rotating Hooks - 2 Pro Indexed Inline Adjusters (4/5mm)
In-line cable tension adjusters - Indexed fine-tuning allows you to feel each "click" of adjustment and prevents loosening from vibration - Fits cable housing without ferrules
$43.90 - $99.90
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
Jagwire's Universal Pro End Cap Packs contain a complete selection of aluminum housing ferrules and cable end caps (crimps) so that you can properly setup your cables and housing sections and prevent fraying cables. They come in 6 colors for customizing your ride, too.
• Break-Away Quick Disconnect • Time saving system for managing brake cables on Break-Away bikes • Light threaded alloy barrels with rubber noise dampener • Available for both derailleur and brake cables • Brake Quick Disconnect sold individually • Derailleur Quick Disconnect sold in pairs
Page 1 of 6 Next page